Firstly, clean the machine and workplace thoroughly; Secondly, check if the vacuum cleaning system is functioning properly; Then check if the push table saw blade is sharp; Whether the size of the saw blade is in a straight line; Test the machine for about one minute to see if it is running normally; Finally, prepare the materials and accessories.

Preparation for CNC panel saw startup

1. Check if the power switch of the CNC cutting saw is pushed in place and if there is a phase loss in the current, in order to prevent the machine motor from burning out due to phase loss during machine activation.

2. Clean the machine table and workplace thoroughly. When operating a CNC panel saw, the person who turns on the machine must stand with their legs straight, body straight, not prone or leaning against the operating platform.

3. Check whether the CNC cutting saw blade is perpendicular to the sliding table, and whether the large and small saw blades are in the same straight line. Test the machine for about one minute to see if the CNC panel saw is running properly.

4. First, push the bed a few times to check if the slide is smooth, and keep the slide clean and smooth.

5. Prepare the materials and accessories.

The CNC panel saw has the characteristics of simple operation, stability, safety, and efficiency, and is an essential equipment for batch, standardized, mechanized, and professional production of furniture. CNC panel saws produced abroad and in Shenyang have better adaptability and stability, and their accuracy meets the cutting requirements of solid wood and composite boards.